BROTHER HL-2170W WIRELESS DRIVER DOWNLOAD

Large objects and walls between the two devices as well as interference from other electronic devices can affect the data transfer speed of your documents. Encryption methods Encryption is used to secure the data that is sent over the wireless network. Wait at least one minute for the printer to refresh itself with the wireless settings. The computer must be on your network. The SSID is a byte or less value and is assigned to the access point. Have you checked the manuals?

Uploader: Yoshicage
Date Added: 15 March 2005
File Size: 36.40 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 59414
Price: Free* [*Free Regsitration Required]

Video of the Day. Hold down the “Go” button on h-2170w top-left side of the printer, then continue to hold the button as you use the power switch to turn the printer back on. If your access point is set to not broadcast the SSID you can manually add it by clicking the Add button. Click the “OK” button. A secret pre-determined key is shared by all devices that will access the wireless network.

Configure the Brother machine for a wireless network with a network cable using the Installation CD-ROM This FAQ explains how to configure your Brother machine for a wireless network using the Wireless setup wizard and a network cable wirelesx.

Uses 13 text characters. Encryption methods Encryption is used to secure the data that is sent over the wireless network.

  36MM FORK SEAL DRIVER DOWNLOAD

How to Set up an Hl-2170W for Wireless

Press the “Go” button tjhree times to print out the printer settings again. Configure the wireless settings: Matthew Burley has been a writer of online content since The Brother printer supports the following encryption methods: None No encryption method brothee used.

Have you checked the manuals? How does the information on this page help you? Turn off the printer using the power switch on the left side of the printer. Wait at least one minute for the printer to refresh itself with the wireless settings. Wireless network terms and concepts When you configure the wireless network printer, you must ensure that your wireless network printer is configured to match the settings of the existing wireless network.

Very helpful Helpful Not helpful. Open system Wireless devices are allowed access the network without any authentication. For further information, see Ethernet wireless network.

Configuring the wireless network settings (For HLW)

This FAQ explains how to configure your Brother machine for a wireless network using the Wireless setup wizard and a network cable temporarily. Each wireless channel is on a different frequency. Go to the Contact Us section. Network Key There are some rules for each security method: On the last page of the printer settings document is a Node Type listing.

  COBRA L4V X SPEED DRIVER

Setup Guide

If this listing says “Inactive,” you need to connect the Ethernet cable to a different port on the back of the router, then repeat this step. Keep holding the “Go” button down until all of the lights on the top of the printer are illuminated, then release wireldss “Go” button.

If not, press and hold the “Go” button for 20 seconds to enable the wireless interface. Brought to you by Techwalla.

How to Set up an HlW for Wireless | It Still Works

If your question was not answered, have you checked other FAQs? The access point and wireless network devices regularly send wireless packets referred to as a beacon which has the SSID information.

The WEP key is case sensitive. Due to these factors, wireless may not be the best method of connection for all types of documents and applications.

This section provides some of the main terms and concepts of these settings, which may be helpful when you configure the wireless network printer.

Author: admin